BMW 840Ci Owner's Handbook Manual page 64

On-board computer
Remote control
The flashing turn indicator lever can
also be used to display on-board
computer information.
You must first program the items of
information you wish to have dis-
played.
Input:
1 Press the turn indicator lever in
until the display shows PROG 1.
2 Press the computer infomation
buttons for the displays you need.
The program number appears in
the display for each input.
3 Press SET/RES.
If you wish all the information to be
accessible:
1 Press the turn indicator lever in
until the display shows PROG 1.
2 Press SET/RES.
b
The following should be noted in
connection with average fuel con-
sumptions 1 and 2 and switch-on
times 1 and 2 for the independent
heater/ventilation control: to show
both consumption figures, the CON-
SUM button must be pressed twice. To
obtain only CONSUM 2, for example,
but not CONSUM 1, press the CON-
SUM button and then the km/mls
changeover button. (Each time the
changeover button is pressed, the
display will alternate between average
fuel consumptions 1 and 2.)
Adopt the same procedure for inde-
pendent heater/ventilation control
switch-on times 1 and 2 if required.c
To display:
Press the turn indicator lever in briefly
as often as necessary.
Online Edition for Part-No. 01 41 9 790 191 - © 12/98 BMW AG
63