BMW 840Ci Owner's Handbook Manual page 119

Bulb changing
118
High beam headlight (3)
a
Protective eyewear and gloves
should be worn when handling this
bulb, If the bulbs are damaged, injury
may be caused.c
1 Turn the cover to the left and take
it off (bayonet catch).
2 Pull off the plug.
3 Press the spring wire clip and dis-
connect it.
4 Change the bulb.
Lighting strip
Inner: high beams/headlight flasher
H1, 55 Watt bulb
Centre: side and parking light/daytime
*
driving light
21/5 Watt bulb
Outer: Left/right flashing turn
21 Watt bulb
Removing:
1 Pull the grille out forwards.
2 Take out the two Phillips-head
screws (arrows).
3 Pull the lighting strip out forwards,
pivoting it slightly towards the out-
side of the car and removing it
from the guide.
High beam/headlight flasher (1)
1 Press the cover away from its
fastenings with a screwdriver.
2 Disconnect the cable.
3 Release the spring wire clip and
change the bulb.
Side and parking light/daytime
driving lights (2)
1 Turn the bulb holder to the left and
remove it.
2 Press the bulb in slightly and turn it
to the left to remove.
Flashing turn indicator (3)
1 Press the bulb holder in slightly
and turn to remove.
2 Remove the bulb in the same way.
Online Edition for Part-No. 01 41 9 790 191 - © 12/98 BMW AG