Caution When Servicing - Aiwa IC-DP200 Service Manual

CAUTION WHEN SERVICING

QQ
3 7 63 1515 0
• Disassembly
Remove two screws on the left and right sides of the unit and four screws on the battery case, then remove the CABINET REAR.
• Check items
Focus checking
1) Short-circuit TEST terminal on DIGITAL PWB with solder.
2) Solder + (core wire) of Pin code onto V-OUT terminal.
3) Solder - of Pin code onto GND terminal.
4) Connect Pin plug to monitor (or a TV with image output terminal).
5) Insert batteries to the IC-DP200 unit. Test mode is activated. DISPLAY is all lit
and filming MODE starts.
6) Check the monitor.
• Adjustment is focused on 1.5m.
• There is a resolution difference between monitor screen (monochrome) and PC screen.
7) After checking operation, remove TEST terminal on DIGITAL PWB.
TE
L 13942296513
www
.
http://www.xiaoyu163.com
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
Q Q
3 6 7 1 3 1 5
co
.
– 3 –
9 4 2 8
0 5 8 2 9 9 4 2 8
m
9 9
9 9