NEC NP03WI Instruction Manual page 8

Part names of the supplied stylus pen
Pen tip
Charging the stylus pen
Use the supplied USB cable for charging the stylus pen to connect the charging port (USB) of the stylus
pen with the USB port of the computer.
The stylus pen will start charging. Charging will complete in about 3 minutes.
• Pressing the pen tip against a screen or white board will turn the indicator LED to red, which indicates
that charging is completed and you are ready to use the stylus pen. If the red LED turns off, charge
the stylus pen.
Cautions on using the stylus pen
• Do not damage the stylus pen by dropping it on the floor or mishandling it.
• Keep the stylus pen away from water and other liquids. If the stylus pen gets wet, wipe the stylus pen
dry immediately.
• Avoid heat and humid when possible.
Indicator (LED)
ENG-8
Charging port (USB)