Miele CVA 6800 Installation Instructions Manual page 7

Tip: A place to set down the coffee
system at the level of the installation
recess is helpful. This makes it easier
for you to install the system's
connections.
^ Unscrew the four feet on the
underside of the unit by about 1/16"
(2 mm) using the larger Allen wrench.
The feet can be unscrewed by up to
3/8" (10 mm).
^ Connect the system to the electricity
supply.
^ Insert the coffee system all the way
into the installation recess.
When inserting the system into the
recess, make sure the electrical
connection is not damaged.
^ Make sure that the coffee system is
centered and straight in the
installation recess. If necessary, align
the system using the four feet.
The coffee system comes with four M5
Allen head screws that you can use to
align and fasten it in the installation
recess.
^ Open the front door and partially
tighten the screws.
^ Align the appliance by carefully
adjusting the lower Allen head
screws until the unit is centered in the
installation recess.
^ To secure the system in the cabinet,
tighten the upper Allen head screws
by hand.
Installation
85