Switching The Soundbar And Subwoofer On - Medion P69099 Instruction Manual

6.1.4. Use of the headphone socket
Portable devices, e.g. CD player or MP3 player, can be connected to the audio
equipment socket "M P 3 L I N K " (top of Soundbar panel, jack Ø = 3.5 mm).
 Set the audio device to a medium volume. Then switch it off.
NOTE
If the volume decreases after switching off the audio device, set the
volume back to a medium level after connecting the audio device. If the
volume on the audio device is too low, there may be disruptions in the
transmission between the transmitter and the Soundbar.
 Plug the connector into the headphone output socket on the audio device.

6.2. Switching the Soundbar and subwoofer on

 Press the S TA N D B Y button on the top of the Soundbar or the S TA N D B Y
button on the remote control to switch the units on.
 Wait for the automatic connection between the Soundbar and subwoofer.
If the connection is established, the Pair-LED on the subwoofer will light up
green.
The units are now ready for operation.
 If the connection between the Soundbar and subwoofer is not established, the
Pair-LED on the subwoofer will remain red or purple. In this case please connect
the units manually.
 Switch on the audio device, select a medium volume and start playback.
NOTE
If a TV or external device is connected via the AUX IN or MP3 Link
connection then the Soundbar and subwoofer will switch on
automatically when the respective television or the external device
is switched on. This function is not available for the devices that are
connected via the optical input.
If the TV or the external device are disconnected or switched off, then
the Soundbar and subwoofer will switch off automatically after 15
minutes.
Likewise, if the volume on the television or an external device is too
low, then the Soundbar and subwoofer will switch off after about 15
minutes.
After Sales Support
Telephone: 1300 884 987
Internet: www.medion.com.au
EN
19 of 24