Bluetooth Connection - Medion P69099 Instruction Manual

6.1.3. Bluetooth connection

Bluetooth operation enables the wireless reception of audio signals from an
external Bluetooth-compatible audio output device. Ensure that the distance
between the two devices is not greater than 10 metres.
Switching on the Soundbar for Bluetooth reception
 Switch on the Bluetooth mode on the Soundbar by pressing the SOURCE button.
 Press and hold the B T PA I R button on your remote control for a few seconds.
The blue Bluetooth-LED starts blinking slowly. The device is now ready to be paired
with another Bluetooth device.
 Switch on the Bluetooth function on your audio output device and activate the
search for new Bluetooth devices.
NOTE
If required, please refer to the corresponding operating instructions for
information on the Bluetooth functionality of your audio output device.
The Soundbar's device name MD 84510 will be displayed as soon as a signal is
found.
 Select the Soundbar from the list of available Bluetooth devices and make the
connection to the speaker via the menu on your audio output device.
NOTE
If you are asked for a password, enter 0000.
The pairing is complete when the Bluetooth-LED lights permanently.
If there is already an existing connection to the speaker, press the B T
PA I R button on the remote control for a few seconds to re-activate the
pairing mode, the existing connection will be interrupted.
Having the Soundbar connected to a device that supports the A2DP profile and
AVRCP profile (Audio Video Remote Control), the Soundbar is used as output device.
The audio signals are only output by the Soundbar. Then the following functions are
available:
−
Pause/play
−
/ Skip to a track
Bluetooth-LED
The following LED displays are possible:
Bluetooth-LED
Steady blue light
Blinking blue light
After Sales Support
Telephone:
18 of 24
Internet:
The pairing is completeted.
The device is in search mode or playback has been
stopped.
1300 884 987
www.medion.com.au
Meaning