Using The Epg - Pioneer pdp-505xde Operating Instructions Manual

Using Electronic Programme Guide (EPG) (for DTV only)

Using the EPG

Use the following procedure to check the schedule of digital
TV programmes, view information about desired
programmes, and/or select programmes.
1
Press EPG.
• The EPG screen appears.
• The EPG screen updates automatically if the EPG
data is acquired successfully. If not, the EPG screen
shows a blank image.
2
Select a desired TV programme ( / ,
007
**************
***********************
***********************
Sun.12.Sep Sun.12.Sep 11:30
********** ****************
**** **************
****** **************
************* ************************
********** ********************************
************* **********************
********** ****************
*********** ****************
• Press P +/P – to skip to the next or previous Channel
List page.
• Information about the selected programme appears
in the information window.
• To watch a programme currently on air, select the
programme (then ENTER).
• You can check information about programmes
scheduled up to 1 week ahead, depending on
conditions.
• Depending on conditions, it may take some time to
acquire EPG data.
/ ).
00:00 - 12:00
12:00 12:30
***************** **************
**************** *****************
**************
****************
*****************
3
To view more information (not currently displayed)
about the selected programme, press p.
• Detailed information appears in the schedule window.
• If the screen contains further information, "More ..."
is displayed.
• To quit the display of detailed information, press p
again (or RETURN).
001
************
*************
**************************
4
To quit the Programme Guide, press EPG again.
• The general programme list does not show finished
programmes.
02
13:40 - 14:05
More...
11
En