Call Operation; Pairing/Connecting With Other Bluetooth Device; Pairing With Other Bluetooth Device; Pairing And Connecting With Bluetooth Usb Dongle - Seecode vision HF920 User Manual

2.8.2 Call Operation

When two handsets are connected with the Seecode Vision simultaneously:
1. If only one handset receives a call, the call will be transferred to Seecode Vision and all the operations
will be the same as those of single pairing.
2. If the two handsets receive calls at the same time, the Seecode Vision can accept only the call which
reaches it first. In this case, all the call operations on Seecode Vision will act on this call only, including
call waiting and conference calling. When the first call is ended, you must press button
other call from the other handset to Seecode Vision. Otherwise, the other call will stay on the handset.

2.9 Pairing/Connecting with Other Bluetooth Device

2.9.1 Pairing with Other Bluetooth Device

Besides the Bluetooth handset, the Seecode Vision can be paired with other Bluetooth devices to establish short-
distance Bluetooth communication. For how to operate the Seecode Vision for pairing, refer to section "2.5.1". For
how to operate the Bluetooth device for pairing, refer to its user manual.
Seecode Vision can save the pairing information of up to 8 Bluetooth devices including Bluetooth handsets. The
information is saved in the sequence of the pairing. For how to remove the pairing information from the Seecode
Vision, refer to section "2.5.2".
After pairing, wireless short-distance communication can be established between any of the Bluetooth devices and
Seecode Vision. For how to establish the Bluetooth connection, refer to section "2.5.4".

2.9.2 Pairing and Connecting with Bluetooth USB Dongle

Before pairing and connecting, please ensure your USB Dongle has already been connected with PC and the IVT's
BlueSoleil driver has been installed in PC.
Detailed operation procedures are as follows:
1) Press button to enter the main menu. Select
When you hear voice prompt "Please select Vision from mobile phone and enter pin code 0000" and see
icon indicator
2) Start "IVT BlueSoleil". Select My Bluetooth>Bluetooth Device Discovery on the software menu bar to
search for the Bluetooth device.
3) After Seecode Vision is found, right-click Vision, and then select Pair Device.
4) Enter passkey 0000
5) After the paring succeeds, red √ will be displayed before the device name Vision. Right-click Vision and
select Connection>Bluetooth AV Service to establish AV service connection between IVT and Seecode
Vision.
6) To remotely control the play of the music on PC, you can start Windows Media Player and set the speaker
interface to Bluetooth AV/HS Audio after establishing AV service connection.
.
displayed on the screen, the pairing succeeds.
and then select Activate.
Seecode Vision HF920
to transfer the
18