Table Of Contents; Introduction - Niles SVL-2 Installation & Operation Manual

S
P E A K E R
SVL-2
Speaker Selection/
Volume Control
System

TABLE OF CONTENTS

Introduction
Features and
Benefits
Installation
Considerations 4
Installation
Operation 10
Specifications 14
1
S
E L E C T I O N

Introduction

The SVL-2 is a combination speaker selector and volume con-
1
troller. It allows you to connect two pairs of speakers to your
stereo receiver or amplifier and adjust the volume of each
pair independently. Additionally, you can choose to listen to
2
either pair of speakers, or both pairs simultaneously. You
don't have to worry about overloading your amplifier. The
SVL-2 has a protection circuit that keeps your amplifier run-
ning safely, even with both pairs of speakers playing.
8
A perfect application for the SVL-2 is individually controlling
speaker "ON/OFF" and volume adjustment for two pairs of
speakers: one pair in the room with the main stereo system
and another pair at a remote location. The SVL-2 adjusts the
volume of the speakers connected to it by attenuating the
amplifier signal. Niles volume controls use autoformers
instead of L-pads for the volume controlling element. This
assures minimal internal power dissipation with virtually no
power wasted as heat.
/ V C
O L U M E
S
O N T R O L Y S T E M