Remote Control Unit - Samsung DCB-B263Z Instructions For Use Manual

MF68-00411A_GB 1/23/07 7:38 PM Page 10

Remote Control Unit

N N o o t t e e : When inserting batteries,
make sure that the polarity(+/-) is correct.
DESCRIPTION
1. POWER
This is for switching the receiver
ON/STANDBY mode.
2. 0-9 NUMERICAL keys
These keys are to enter numeric values
and to select the channel directly by
entering its number.
3. PG+/PG-
These keys are for moving up or down
pages on the menu and TV/Radio list.
4. TV/RADIO
This key is for toggling between the TV
channel and Radio channel.
5. MUTE
This key is for toggling between
normal & muted audio.
6. FAV
Use the key to switch between favorite lists.
7. EPG(Electronic Program Guide)
EPG key displays the TV/Radio Program
guide.
8. LAST
This key is for calling up directly whatever
channel you were watching from the list.
9. TEXT(GREEN)
This key is for selecting the Subtitle and
Teletext mode. This key functions same as
the GREEN key on the menu.
Press it once - subtitle banner is shown.
You can select language you want using
/ keys. Press it twice - teletext OSD
banner appears. You can select language
using / keys. Teletext will be displayed
on TV Screen without operating anything
on TV. This Teletext can be displayed on TV,
which doesn't support Teletext functionality.
GB-10
D I G I T A
10. ALT(YELLOW)
11. AUDIO(BLUE)
12. i (INFORMATION) This key is for displaying the program information box in the screen.
(RED)
13. MENU
14. EXIT
15. OK
16. / / /
17. CH /CH
18. VOL+/VOL-
19. TIMER
L C A B L E R E C E I V
DESCRIPTION
This key is for selecting the soundtrack list for the current service.
This key functions same as the YELLOW key on the menu.
Press it once and sound track appears.
Press it twice and video track appears.
The sound and video track services are not provided for every channel
and depend on the conditions the operator is in.
This key is for displaying the help message in the sub-menu.
This key is for changing the Audio to the left, right or both channels,
This key functions same as the BLUE key on the menu.
This key functions same as the RED key on the menu.
Press it once and you can get simple information on the program.
Press it twice and you can get detailed information on the channel in
text box.
This key is for opening up the menu or returning to the previous menu.
This key is for exiting a menu or returning to the previous menu or exiting
some banners.
This key is for entering and confirming any data to the receiver in the
menu system. This key is for selecting the item. Press while viewing
TV and a list of channels is displayed.
These keys are for moving the highlight bar for selecting options on the
menu.
These keys are for changing channels.
These keys are for increasing or decreasing the volume.
These keys are for changing channels.
These keys are for increasing or decreasing the volume.
This key is for reserving events(programs) into timer(s) in EPG.
If a event is set in timer, it will be turned on/off automatically based on
start/end time of event. This key activates/deactivates timer(s) in EPG
as toggle type. After activating EPG screen by pressing 'EPG' key, you
can select the interesting event (program) using the
/ keys. Then, press 'TIMER' key. If this event is reserved in the timer,
® is displayed on the right corner of this event name. 'EPG' on 'Event
Repetition' in 'Time & Timer Settings' menu is displayed, too.
However, if there is no event on EPG for the channel, this TIMER key
can not be supported.
GB-11
E R
/ keys and