Description; Front Panel; Rear Panel - Samsung DCB-B263Z Instructions For Use Manual

MF68-00411A_GB 1/23/07 7:38 PM Page 8

DESCRIPTION

Front Panel

1 2
1. Infrared Sensor This is to receive the IR commands from the Remote Control Unit.
2. LED When the LED light Red, the set-top box enters the standby mode.
When the LED light Green, it enters the operation mode.
3. Smart Card Slot 1 slot for Conax smartcard.
N N o o t t e e : Smart Cards are only distributed by service providers and special distributors,
not by SAMSUNG.
3
GB-8
D I G I T A L

Rear Panel

1 2
1. CABLE IN
2. LOOP
3. AV1 (TV)
4. AV2 (EXT)
5. DIGITAL AUDIO OUT
6. AC MAINS
C A B L E R E C E I V E R
DESCRIPTION
3 4 5 6
This port is to connect the coaxial cable from your Cable system.
To enable the connection of an Analog receiver.
The receiver is provided with this "LOOP" port.
This is used to connect to your TV.
This is used to connect to your VCR.
Output for connection to a digital amplifier.
This is to plug in the AC mains power cord.
The input AC voltage range is 100V to 240V, 50Hz/60Hz supply.
GB-9