Specifications - Niles PHD30 Installation Manual

SPECIFICATIONS

PHD60
Driver Complement
• Four 5-1/4" TCC Woofers
• 1-1/2" Teteron Midrange
with fluid cooling
• 1" Teteron Tweeter with
fluid cooling
Design Principle
• Bass-reflex design
• 3-way crossover for
optimum phase and
frequency response
• Adjustable, dispersion-
controlling, midrange/
tweeter pod
Recommended Amplifier
Power
10 to 250 watts per channel
Nominal Impedance
4 ohms
Frequency Response
55 Hz to 21 kHz, +/- 3 dB
Sensitivity
90 dB with 2.83 V pink noise
input, measured at 1 meter
on axis
Dimensions (with Wall
Bracket)
34.7" H x 6.2" W x 5.6" D
Weight
40 lb
Wiring Requirements
We recommend using 16- to
18-gauge loudspeaker wire
for runs up to 80 feet and
14-gauge loudspeaker wire
for runs up to 200 feet. The
connectors will accommodate
12- to 22-gauge wire.
14
PHD42
Driver Complement
• Four 5-1/4" TCC Woofers
• 1-1/2" Teteron Midrange
with fluid cooling
• 1" Teteron Tweeter with
fluid cooling
Design Principle
• Bass-reflex design
• 3-way crossover for
optimum phase and
frequency response
• Adjustable, dispersion-
controlling, midrange/
tweeter pod
Recommended Amplifier
Power
10 to 200 watts per channel
Nominal Impedance
4 ohms
Frequency Response
63 Hz to 21 kHz, +/- 3 dB
Sensitivity
89 dB with 2.83 V pink noise
input, measured at 1 meter
on axis
Dimensions (with Wall
Bracket)
24.8" H x 6.2" W x 5.6" D
Weight
30 lb
Wiring Requirements
We recommend using 16- to
18-gauge loudspeaker wire
for runs up to 80 feet and
14-gauge loudspeaker wire
for runs up to 200 feet. The
connectors will accommodate
12- to 22-gauge wire.
PHD30
Driver Complement
• Two 5-1/4" TCC Woofers
• 1" Teteron Tweeter with
fluid cooling
Design Principle
• Bass-reflex design
• 2-way crossover for
optimum phase and
frequency response
• Symmetrical driver
configuration for dispersion
control and precise imaging
Recommended Amplifier
Power
10 to 150 watts per channel
Nominal Impedance
4 ohms
Frequency Response
70 Hz to 21 kHz, +/- 3 dB
Sensitivity
89 dB with 2.83 V pink noise
input, measured at 1 meter
on axis
Dimensions (with Wall
Bracket)
19.6" H x 6.2" W x 5.6" D
Weight
20 lb
Wiring Requirements
We recommend using 16- to
18-gauge loudspeaker wire
for runs up to 80 feet and
14-gauge loudspeaker wire
for runs up to 200 feet. The
connectors will accommodate
12- to 22-gauge wire.