Sony SRP-X500P Manual page 4

Wireless Control of the SRP-X500P or
Peripheral Equipments
Using the optional RM-AV3000 Series Remote
Commander, frequently accessed operations of the
SRP-X500P and connected projector can be wirelessly
controlled:
SRP-X500P
• AV/RGB selection
• Master volume adjustment
• Master volume muting
Projector
• Projector Power ON/STANDBY
Versatile Interfaces
The SRP-X500P offers an array of video, PC,
and audio I/Os. In addition to conventional
composite and component video inputs, it
supports computer RGB input and output, both
of which accommodate up to SXGA resolution.
As for audio, four microphone inputs and two
stereo line inputs are available, each which can
be freely assigned to the four audio outputs.
Built-in Four-Channel
Digital Power Amplifier
The SRP-X500P is equipped with a four-channel
digital power amplifier that can be switched
between high and low impedance modes to
suit various room types.
Low impedance mode:
90 W + 90 W + 50 W + 50 W (4 Ω, 8 Ω)*
High impedance (70 V line) mode:
90 W + 90 W (4 Ω, 8 Ω)* + 60 W (82 Ω)
* The same power rating can be acquired for both 8 Ω
and 4 Ω speaker impedance. Connect the speakers so
the total speaker impedance is 4 Ω or higher.
PC Control With Easy-to-Use GUI
For system setup and operation from a PC, the
SRP-X500P is supplied with the Windows-based
SRP-X500P Manager software.* From its easy-
to-use GUI, operators can control detailed
settings such as the equalizer, AGC, and
compressor, before the presentation.
* System requirements:
OS: Microsoft ® Windows ® Me, 2000 Professional,
XP Professional or XP Home Edition
CPU: Intel ® Celeron ® 400 MHz or higher
RAM: 128 MB or greater
Available hard disk space: 20 MB or higher
SRP-X500P Manager Block Screen
Rear Panel