JVC KD-AV41BT Instruction Manual page 16

More Information
• Playing MP3/WMA files:
- This unit can play back files with the extension
code <.mp3> or <.wma> (regardless of the letter
case-upper/lower).
- This unit can play back the files meeting the
conditions below:
• Bit rate: 32 kbps- 320 kbps
• Sampling frequency: 8 kHz- 48 kHz
- This unit can show ID3 Tag Version
1.0/1.1/2.2/2.3/2.4 (for MP3).
- This unit can also show WMA Tag.
- This unit can play back files recorded in VBR
(variable bit rate).
- Files recorded in VBR have a discrepancy in elapsed
time indication.
- This unit cannot play back the following files:
• MP3 files encoded with MP3i and MP3 PRO
format.
• MP3 files encoded with Layer 1/2.
• WMA files encoded with lossless, professional,
and voice format.
• WMA files which are not based upon Windows
Media® Audio.
• WMA files copy-protected with DRM.
About iPod/iPhone
• Made for
- iPod touch 4th generation
- iPod touch 3rd generation
- iPod touch 2nd generation
- iPod classic
- iPod nano (6th Generation)
- iPod nano (5th Generation)
- iPod nano (4th Generation)
- iPod nano (3rd Generation)
- iPhone 6S Plus
- iPhone 6S
- iPhone 6 Plus
- iPhone 6
- iPhone SS
- iPhone SC
- iPhone 5
- iPhone 4S
- iPhone 4
- iPhone 3GS
- iPhone 3G
• The song order displayed on the selection menu of
this unit may differ from that of the iPod/iPhone.
• Video playback is not compatible with this unit.
16
Maintenance
Cleaning the unit: Wipe off dirt on the faceplate
with a dry silicon or soft cloth.
Cleaning the connector:
Detach the faceplate and
clean the connector gently with a cotton swab,
being careful not to damage the connector.
~JL 0~
Connector (on the reverse side of
the faceplate)
Handling discs:
• Do not touch the recording surface of the disc.
• Do not stick tape etc. on the disc, or use a disc
with tape stuck on it.
• Do not use any accessories for the disc.
• Clean from the center of the disc and move
outward.
• Clean the disc with a dry silicon or soft cloth. Do
not use any solvents.
• When removing discs from this unit, pull them
out horizontally.
• Remove burrs from the center hole and disc edge
before inserting a disc.