NetApp CN1610 Cli Command Reference page 211

Chapter 4: Utility Commands
Output
Inserted Card
Model Identifier
Inserted Card
Description
Configured Card
Description
Example: The following shows example CLI display output for the
command:
(CN1610) #show slot
Admin
Slot Status State
----- ------ ------- ------- ------------- ---------
0 Full Enable
Example: The following shows example CLI display output for the
command:
[slot]
(CN1610) #show slot 0
Slot.............................. 0
Slot Status....................... Full
Admin State....................... Enable
Power State....................... Enable
Inserted Card:
Model Identifier............... BCM53716-16FE
Card Description............... Broadcom BCM53716 - 16 Port 10GB
Ethernet
Configured Card:
Model Identifier............... BCM53716-16FE
Card Description............... Broadcom BCM53716 - 16 Port 10GB
Ethernet
Pluggable......................... No
Power Down........................ No
Description
The model identifier of the card inserted in the slot.
Model Identifier is a 32-character field used to
identify a card. This field is displayed only if the slot
is full.
The card description. This field is displayed only if
the slot is full.
10BASE-T half duplex.
Power Configured
State Model ID
Enable BCM53716-16FE No
Line Card
Line Card
Card Power
Pluggable Down
-----
No
show slot
show slot
207