Panasonic EY0L82 Operating Instructions Manual page 9

Hide thumbs Also See for EY0L82:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 4
ONLY FOR U. K.
IV
. ELECTRICAL PLUG
INFORMATION
FOR YOUR SAFETY PLEASE READ
THE FOLLOWING TEXT CAREFULLY
This appliance is supplied with a mould-
ed three pin mains plug for your safety
and convenience.
A 5 amp fuse is fitted in this plug.
Should the fuse need to be replaced
please ensure that the replacement
fuse has a rating of 5 amp and that it is
approved by ASTA or BSI to BS1362.
Check for the ASTA mark
mark
on the body of the fuse.
If the plug contains a removable fuse
cover you must ensure that it is refitted
when the fuse is replaced.
If you lose the fuse cover the plug must
not be used until a replacement cover
is obtained.
A replacement fuse cover can be pur-
chased from your local Panasonic
Dealer.
IF THE FITTED MOULDED PLUG IS
UNSUITABLE FOR THE SOCKET
OUTLET IN YOUR HOME THEN THE
FUSE SHOULD BE REMOVED AND
THE PLUG CUT OFF AND DISPOSED
OF SAFELY.
THERE IS A DANGER OF SEVERE
ELECTRICAL SHOCK IF THE CUT
OFF PLUG IS INSERTED INTO ANY
13 AMP SOCKET.
If a new plug is to be fitted please ob-
serve the wiring code as shown below.
If in any doubt please consult a quali-
fied electrician.
EY0L80_81(EU).indb
9
IMPORTANT:
The wires in this mains lead are
coloured in accordance with the
following code:
Blue: Neutral
Brown: Live
As the colours of the wire in the mains
lead of this appliance may not corre-
spond with the coloured markings iden-
tifying the terminals in your plug, pro-
ceed as follows.
The wire which is coloured BLUE must
be connected to the terminal in the plug
which is marked with the letter N or col-
oured BLACK.
The wire which is coloured BROWN
must be connected to the terminal in
the plug which is marked with the letter
or the BSI
L or coloured RED.
Under no circumstances should either
of these wires be connected to the
earth terminal of the three pin plug,
marked with the letter E or the Earth
Symbol
How to replace the fuse: Open the
fuse compartment with a screwdriver
and replace the fuse and fuse cover if it
is removable.
Fuse Cover
This apparatus was produced to BS800.
- 9 -
.
2014-3-12
09:51:03

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents