Sony SLV-EZ715AS Operating Instructions Manual page 23

To save a recording
To prevent accidental erasure, break off the
safety tab as illustrated. To record on the tape
again, cover the tab hole with adhesive tape.
Tips
• To select a programme position, you can use the programme number buttons on the
remote commander. For two-digit numbers, press the ? (ten's digit) button
followed by the programme number buttons.
• You can select a video source from the LINE-1 IN or LINE-2 IN (SLV-EZ715AS/NZ
only) jacks. Press INPUT SELECT or PROG +/– to display "L1" or "L2" (SLV-
EZ715AS/NZ only) in the display window.
• The display appears on the TV screen indicating information about the tape, but the
information will not be recorded on the tape.
• If you do not want to watch TV while recording, you can turn off the TV.
• You can have the VCR stop recording automatically after starting at a specified
time. For details, see "Setting the recording duration time" on page 39.
Notes
• The display does not appear during still (pause) mode or slow-motion playback.
• It may take up to one minute for the VCR to calculate and display the remaining
tape length after you press DISPLAY.
01GB04BAS-715AS/NZ.p65 23
SLV-EZ715AS/NZ_GB
Safety tab
Basic Operations
10/1/01, 11:59
3-065-579-11 (1)
23