Disabling unwanted programme positions
After presetting channels, you can disable unused programme positions. The
disabled positions will be skipped later when you press the PROG +/–
buttons.
1
Press MENU, then press M/m to move the cursor (B) to TUNER
PRESET and press OK.
2
Press PROG +/– to select the programme position you want to skip.
3
Press M/m/</, to move the cursor (B) to ADD/ERASE, then select
ERASE.
4
Press OK.
If the picture is not clear
Normally, the Auto Fine Tuning (AFT) function automatically tunes in
channels clearly. If, however, the picture is not clear, you may also use the
manual tuning function.
1
Press PROG +/– to select the programme number for which you cannot
obtain a clear picture.
2
Press MENU, then select TUNER PRESET and press OK.
3
Select FINE TUNING.
The fine tuning meter appears.
TUNER PRESET
NORMAL / CATV
AUTO PRESET
CHANNEL SET
ADD / ERASE
AFT
FINE TUNING
SET
4
Press </, to get a clearer picture, then press OK.
Note that the AFT (Auto Fine Tuning) setting switches to OFF.
Note
• The menu disappears automatically if you do not proceed for more than a few
minutes.
01GB03GET-715AS/NZ.p65
Selected programme position
PROG14
•
NORM
CATV
35
•
ADD
ERASE
•
ON
OFF
: [
]
17
10/1/01, 11:58
SLV-EZ715AS/NZ_GB
17
Getting Started
3-065-579-11 (2)