Table of Contents
Advertisement
Operation with Headset or FM device
The R
telephone is equipped with a jack for connection to a headset
ELATION
or an FM device (both available separately).
Headset
1.
Connect the headset to the headset connector jack.
2.
Follow the On-Hook Dialling procedures to make and answer calls
by pressing the
button.
3.
The call is made via the headset's mouth and ear pieces.
4.
The user can switch to handset operation at any time by picking up
the handset.
FM device
The headset jack can also be connected to an FM transmitter or another
assistive listening device equipped with a line or auxiliary input. This allows
you to make a call using your preferred method of communication.
1.
Connect the FM transmitter to the headset or FM device jack.
2.
Follow the On-Hook Dialling procedures to make and answer
calls by pressing the
button.
3.
The call is made via the FM transmitter directly to your ear, while the
microphone in the base picks up your voice.
4.
You can switch to handset operation at any time by picking up the
handset.
16
Redial Memory
The R
telephone is equipped with a redial memory function which
ELATION
allows you to dial a previously called number automatically.
A maximum of 10 previously called numbers can be stored in the phone.
1.
In on-hook mode, press the
2.
Press the
and
buttons to select the number you want to dial.
3.
Lift the handset or press the
accordingly.
4.
To delete a single record, simply press the
want to delete all records, press and hold the
display shows "
". Pressthe
ALL DEL
Speed Dial Memory
Speed Dial Memory provides you with the easiest way to make a call to a
frequently used number.
To store a number in the Speed Dial Memory
1.
In on-hook mode, enter the number you want to store. While
entering the desired number any entry can be deleted by using the
button.
2.
Press and hold the desired Speed Dial Memory (M1, M2, M3)
button until the display shows "
To delete a record from the Speed Dial Memory
Numbers in the Speed Dial Memory cannot be erased. However, the user
can "overwrite" an existing old record or store a blank record.
1.
In on-hook mode, press the
"
".
2.
Press the desired Speed Dial Memory (M1, M2, M3) button once,
and the display will show "
button once.
button. The number will be dialled
button twice. If you
button until the
button again to confirm.
".
SAVE OK
button until the display shows
".
SAVE OK
17
Advertisement
Table of Contents
