Alfa Romeo 2015 4C Owner's Manual page 131

To set the speed limit, proceed as follows:
1. Briefly push the SET/BACK button. The display will
show the message (Speed Buzzer).
2. Push and release the UP
select speed limit activation (On) or deactivation
(Off).
3. When the function is activated (On), briefly push the
SET/BACK button to display the previously set speed.
Pushing the UP or DOWN
speed limit. Push SET/BACK to confirm selection.
NOTE: The setting can be increased or decreased by
5 mph or km/h each time the UP/DOWN button is
pushed for speed settings above 20 mph (32 km/h). To
increase or decrease the set speed rapidly, push and hold
the UP/DOWN button. Save the setting by briefly push-
ing the button when you approach the required setting.
or DOWN button to
buttons selects the
UNDERSTANDING YOUR INSTRUMENT PANEL 129
• Briefly push the SET/BACK button to go back to the
menu screen, or push and hold the SET/BACK button
(approximately one second) to go back to the main
screen without storing the settings.
To cancel the setting, proceed as follows:
1. Briefly push the SET/BACK button. "On" will display.
2. Push and release the DOWN
display.
3. Briefly push the SET/BACK button to go back to the
menu screen, or push and hold the SET/BACK button
(approximately one second) to go back to the main
screen without storing the settings.
Trip B Activation
Through this option, it is possible to activate (On) or
deactivate (Off) the Trip B (partial trip) display.
For further information see "Trip Computer."
4
button. "Off" will