Listening To A Cassette Tape - Sharp XL-UH3H Operation Manual

Listening to the radio (continued)
XL-UH3H
ENGLISH
3
Within 10 seconds, press the PRESET (
select the preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
4
Within 10 seconds, press the MEMORY/DISP button to
store that station in memory.
MEMORY
If the "MEMORY" and preset number indicators disappear
before the station is memorised, repeat the operation from step
2.
5
Repeat steps 1 - 4 to set other stations, or to change a
preset station.
When a new station is stored in memory, the station previously
memorised for that preset channel number will be erased.
Note:
The backup function protects the memorised stations for a few
hours should there be a power failure or the AC power lead become
disconnected.
To recall a memorised station
Press the PRESET ( or ) button for less than 0.5 seconds to
select the desired station.
E-27

Listening to a cassette tape

Before playback:
or ) button to
For playback, use normal or low-noise tapes for the
best sound.
(Metal or CrO
2
Do not use C-120 tapes or poor-quality tapes, as they
may cause malfunctions.
Before loading a tape into the cassette compartment,
tighten the slack with a pen or a pencil.
tapes are not recommended.)