Getting Started - Prestigio Roadrunner HD1 Quick Start Manual

Getting started

3.
Power on/Power off
 Position the device in the vehicle and press the Power Switch
to turn it on. Turn the device off by pressing
again.
 You can also connect the device to the car charger. It will
automatically turn on and start recording when the car engine starts.
When the engine stops, the device will automatically save the last file
and turn off.
4.
Charging
 Connect the device to the USB port or car charger. The LED indicator
will glow with red when charging, turn off, when the device is fully
charged and glow with green when recording.
 Normally it takes approximately 3 hours to fully charge the device.
Operating the device while charging with the AC adapter may extend
the time of full charge.
Note:
Before using the device for the first time, please, connect it to the PC
or notebook using the USB cable provided to fully charge the Li-ion
battery. The battery is completely charged in 3-4 hours.
Note:
The device can also be charged via car charger. Connect the device to
the car cigarette lighter when the car engine is working.
EN – 2
Quick Start Guide
Prestigio Roadrunner HD1
Roadrunner HD1