Federal Communication Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Federal Communication Commission (FCC) Statement Voluntary Control Council for Interference (VCCI) Statement Battery Information Regulatory Certifications 1 Introduction Features Optional Features About the User Guide Abbreviations and Acronyms Chapters in the Manual 2 Installation Unpacking the Unit Installing the Itona Universal Wall Mounting Bracket Preparing to Connect Connecting the Cables and Power Supply...
2. Two USB Ports Figure 1: Itona TC7521d Front View Itona TC7521d delivers smart and robust solutions for thin client computing. Itona TC7521d is an aesthetically and ergonomically designed compact desktop, providing simultaneous full screen connectivity to Windows and UNIX application servers, it is a powerful business alternative to users using Win32 applications while continuing access to legacy UNIX applications.
Note: Please contact the reseller or dealer from whom you purchased the product for information about the optional features. About the User Guide This User Guide provides step by step instructions to install Itona TC7521d. The specifications and troubleshooting steps are also included in this User Guide. Abbreviations and Acronyms...
Chapters in the Manual Chapter No Chapter Name Description Introduction Contains an overview of the product, information about this guide and abbreviations used in this guide. Installation Contains the procedure to set up the hardware. Specifications Contains hardware, mechanical, electrical, interface and operating environment specifications Troubleshooting...
For information on assembling and installing the wall mounting bracket, refer to the Installation_Manual_XLWM_Bracket_Universal.pdf document in the following FTP link: ftp.vxl.net/Documentation/ Note: Use the user name and password provided by VXL Instruments to access the FTP server mentioned above. Preparing to Connect Ensure that the following are available before you install the product: •...
10. PS/2 Mouse Port 11. PS/2 Keyboard Port 12. Audio Out Port 13. AC Power Out 14. AC Power In 15. DVI-D Port 16. Primary VGA Port 17. DVI-I Male Port Figure 2: Itona TC7521d Rear View and DVI-I Splitter Cable Installation...
Page 12
Connectors Connector Symbol VGA Port DVI-I Port USB Port Audio Out Port Mic Port Display Port PS/2 Keyboard Port PS/2 Mouse Port COM Port Ethernet Port (RJ45) Table 1: Connector Symbols Note: Before connecting any cable, ensure that the power cable is unplugged from the unit.
2. Connect the other end to a LAN hub as shown in Figure 3. Figure 3: LAN Connection through TCP/IP 3. Press the power button to switch on the Itona TC7521d. The front panel LED lights up and you will hear a beep. Subsequently, the application start-up screen appears.
Specifications Hardware Processor VIA Eden U4200 Dual Core 1 GHz VGA Memory Default 256 MB (Adjustable in the range of 32 to 512 MB) Flash SSD 32 GB, 22 Pin 2 GB DDR3 1066 MHz Network 10/100/1000 Mbps Maximum Display resolution Secondary VGA: 1680 x 1050 DVI-I: 1920 x1200 DVI-I to DVI-D and Primary VGA Splitter Cable: 1920 x 1200...
Product Dimensions Product dimension with sliding type wall bracket Packed Unit dimension 288 mm (H), 71 mm (W), 310 mm (D) 155 mm (H), 360 mm (W), 385 mm (D) Net weight: 4.5 Kg approx Gross weight: 6.0 Kg approx Specifications...
Operating Environment Operating temperature C to +40 Storage temperature - 20 C to +65 Humidity 20% to 80% RH non-condensing Electrical Line Voltage 100 V to 240 V AC (+6, -10%) Line Frequency 50/60 Hz Power 50 W max Power Consumption Idle State: 11.8 W Sleep Mode: 0.46 W Power Inlet...
Troubleshooting This chapter contains solutions for problems you may encounter while using the product. Problem Solution The power-LED on front panel Ensure that the power cord is plugged into an does not glow when the client AC outlet. is switched on. ...
Appendix Connectors The following section provides pin details for various connectors on the rear panel of the client. COM Port 9-pin D-type male connector, RS232C compatible, operating at 115.2 K baud maximum. Signal Description Data Carrier Detect Receive Data Transmit Data Data Terminal Ready Signal Ground Data Set Ready...
Page 20
Printer Port (Parallel) 25-pin D-type female connector. ECP/EPP compatible. Signal STROBE DATA 0-7 ACKOWLEDGE BUSY PAPER END ERROR 18-25 GROUND Appendix...
Page 21
Video Port 15-pin D-type female connector. Signal Signal No Connection Green No Connection Blue No Connection No Connection No Connection Horizontal Sync Red return GND Vertical Sync Green return GND No Connection Appendix...
Page 22
Display Port 20 pin port with 1.62, 2.7, or 5.4 Gbit/s data rate per lane; 1, 2, or 4 lanes; 1 Mbit/s or 720 Mbit/s for the auxiliary channel. Signal Signal Lane 0 (positive) Ground Ground Lane 3 (negative) Lane 0 (negative) Connected to Ground Lane 1 (positive) Connected to Ground...
Page 23
DVI-I Port Pin C1 to C5 carry the analogue signal.24+ 5 pin DVI Connector. Signal Signal Signal TMDS Data 2- TMDS Data 1/3 TMDS Data 5+ Shield TMDS Data 2+ TMDS Data 3- TMDS Clock Shield TMDS Data 2/4 TMDS Data 3+ TMDS Clock + Shield TMDS Data 4-...
Page 24
10/100/1000 Ethernet LAN Port RJ-45 modular 8-pin jack. 10/100/1000 Mbps. Signal TxD+ TxD- RxD+ RxD- PS/2 Mouse/Keyboard Port Mouse/Keyboard connector Signal Signal Mouse / KBD data Mouse / KBD Clock Audio Port Line Out/Mic ports. Standard audio jacks. Appendix...
Page 25
USB Port 2.0 4-pin series-A receptacle. 6 ports. Signal Appendix...
Need help?
Do you have a question about the Itona TC7521d and is the answer not in the manual?
Questions and answers