Setup Wizard - Mac - D-Link DNR-202L Quick Installation Manual

SETUP WIZARD - Mac

Step 1:
Connect the included Ethernet cable to the network cable connector located on the rear panel of the
DNR-202L and attach it to the network.
Step 2:
Attach the external power supply to the DC power input connector located on the rear panel of the
DNR‑202L and connect it to your wall outlet or power strip. Power is confirmed when the blue LED
Power Indicator located front panel is lit.
Step 3:
Insert the DNR-202L Driver CD in the CD-ROM drive. After you have inserted the CD into your
computer, go to the CD drive directory, and double-click the Mac Utility folder to enter.
SetupWizard
Step 4:
Double‑click the DNR‑202L Setup Wizard file to start the Setup Wizard. When the wizard appears,
click the Start button to begin the wizard, and follow the instructions from the Setup Wizard to finish
setting up your NVR.
4
DNR-202L