Connecting The Wt-3 - Nikon WT-3 User Manual

Connecting the WT-3

1
Turn the camera off and rotate the control lock on
the WT-3 to the L position.
2
Remove the power connector cover from the
WT-3 and attach it to the camera strap or store it
in a safe place. Be sure to replace the power con-
nector cover when the WT-3 is not in use.
3
Open the camera battery chamber cover and re-
move the battery, then remove the battery cham-
ber cover as shown at right.
Important: To ensure that the cover is not lost, place
it in the WT-3 battery chamber cover holder.
4
Insert the WT-3 into the camera battery chamber
as shown.
5
Rotate the knob in the direction shown to fasten
the WT-3 securely to the camera.
6
Open the camera USB connector cover and con-
nect the USB cable from the WT-3 to the camera
USB connector.
18