CHECKING BATTERY POWER
6
~-----------
Exposure indicator LED(s)
lights
up or
blinks
if power is sufficient, and
stays
on
approx.
8
sec.
after you take your
finger off the button.
Lightly press shutter release button
and check viewfinder exposure
indi-
cator LED(s) to make sure battery
power is sufficient.
•••••••••••••••••••••••••
:
Battery power can also be
:
:
checked by film advance
speed,
:
•
operation speed of autofocus
lens
•
:
or flash recycling
time.
When
:
•
these become noticeably
slower,
•
:
c
hange
batteries.
:
•
•
• •
•
•
•
•
•••••••••••••••••••••••••
If LED goes off
approx.
2
sec.
after finger is removed
from
button, batteries
need replacement.
No
LED,
and shutter
locks.
Check battery installation
or change
batteries.
•
••••••••••••••••••••••••••••••••••••••••••••••••••
:
The microcomputer in the N4004s may turn the camera off, even when
:
:
batteries with sufficient power are properly
installed.
To start or resume
:
•
operation
,
remove
batteries
and install
again.
•
•
•
•
•
•••••••••••••••••••••••••••••••••••••••••••••••••••
9