Table of Contents
Advertisement
11.0 Machine Parts List – No Heater Continued
Drawing No. Item ID
50
10-0835-N
51
10-0808
52
10-0816
53
10-0843-COM
54
80-0040-C
55
80-0044-S
56
10-0835-N
57
Hose Fitting
58
Hose Fitting
59
80-0015
60
10-0833
61
80-0044-L
62
Hose Fitting
63
Hose Fitting
64
10-0881
65
80-0016
67
10-0400-D
68
10-0832
69
10-0040
70
80-0026
71
80-0017
72
10-0379
73
10-0400-C
74
10-0868
75
10-0831
Not Shown 80-0200-B-3100
(18) Sniper 12-Gallon, 500 PSI Carpet Extractor
Item Description
Nut for Pump Bolt on Extractor
Caster
Caster Bolt 1/4-20 x 1/2 Hex Bolt
1/2" x 54" Clear Hose for Extractor Pump
Includes Fittings and Filter
46" of Blue 3000 PSI Hose for Extractor
Complete with Fittings and Clamps
30" Black Hose with Fittings and Clamps
Nut for Pump Bolt on Extractor
Part of 80-0044-S
Part of 80-0040-C
500 PSI Pump Mount Plate
Motor Manifold Bolts
67" Black Hose with Fittings and Clamps
Part of 80-0044-L
Part of 80-0044-S
1/4" MNPT x 3/8" JIC 90 Degree
Part of 80-0044-S
500 PSI Pump
Keeper for Extractor Latch
S/R Strap Bolts
3000 PSI Blue Hose - Part of 80-0040-C
Part of 80-0040-C
Bulk Head fitting
8-32 x 3/8 Screw
Latch
1/4" Female QD
S/R Bracket
Extractor Wiring Harness
2.0 Grounding Instructions Continued
This electric equipment is for use on a
Qty.
normal 120 volt circuit. It has a grounded
8.00
plug that looks like the plug illustrated in
2.00
(Fig A). The use of a temporary adaptor is
12.00
NOT recommended.
1.00
NOTE: In Canada, the use of a temporary
1.00
adapter is not permitted by the Canadian
Electrical Code.
1.00
4.00
1.00
3.0 Care of your Carpet Extractor
1.00
Treat your machine as you would any other high grade, precision made product.
1.00
Dropping, unreasonable bumping across thresholds and other misuses may result in a
4.00
damaged unit which will not be covered under warranty.
1.00
1.00
After each use, wipe the extractor body, accessories and power cord with a slightly
1.00
damp cloth. When not in use, the remove the power cord and hoses. Stored in a dry
1.00
area.
1.00
1.00
4.0 Set-Up and Operation
4.00
6.00
DO NOT USE ON WET SURFACES. DO NOT EXPOSE TO RAIN. STORE
1.00
INDOORS.
3.00
All carpet extractors, no matter what the time of year, are shipped with antifreeze in the
8.00
solution lines. Prior to first use, fill the tank with one quart of warm water. Attach the
1.00
hose and using the hand tool wand, flush out the system by spraying the one quart of
1.00
water through the pump.
2.00
1.00
• Attach the 1-1/2 inch vacuum hose and the brass quick disconnect.
• Fill the recovery tank with warm water (less than 100 degrees Fahrenheit). Fill to
approximately 4 inches from the top. Pre-spray a liquid detergent made for carpet
cleaning or upholstery on carpet and agitate carpet. Next, use clean water from
solution tank to extract – this procedure is highly recommended. Note: read and mix
your pre-spray solution to the dilution ratios as directed.
• Be sure to replace any filters back into the machine prior to use.
• DO NOT use citrus acid, buterol or harsh degreasers inside the machine.
• DO NOT use powdered detergents in this machine – will VOID warranty.
Sniper 12-Gallon, 500 PSI Carpet Extractor (7)
Hide quick links:
Advertisement
Table of Contents
