12.0 Base with Pump Components Schematic
(34) 1200 PSI Hard Surface Extractor
2.0 Grounding Instructions
DANGER: IMPROPER INSTALLATION OF THE GROUNDING PLUG CAN
RESULT IN A RISK OF ELECTRIC SHOCK!
This product must be grounded. In the event of an electrical short circuit, grounding
reduces the risk of electric shock by providing an escape wire with an appropriate
grounding plug. The plug must be plugged into an outlet that is installed properly and
grounded in accordance with all local codes and ordinances.
Check with a qualified electrician or serviceman if the grounding instructions are not
completely understood, or if in doubt as to whether the product is grounded properly.
DO NOT modify the plug provided. If it will not fit into the outlet, have a proper outlet
installed by a qualified electrician.
This electric equipment is for use on a
normal 120 volt circuit. It has a grounded
plug that looks like the plug illustrated in
(Fig A). The use of a temporary adaptor is
NOTE: In Canada, the use of a temporary
adapter is not permitted by the Canadian
3.0 Care of your Machine
Treat your machine as you would any other high grade, precision made product.
Dropping, unreasonable bumping across thresholds, leaving outdoors and other misuses
may result in a damaged unit which will not be covered under warranty.
When not in use, the power cord(s) should be wrapped around the molded-in cord wrap
and stored in a dry area. After each use, wipe the machine body, accessories and power
cord(s) with a slightly damp cloth.
WARNING: DO NOT use machine without the proper filters in place. Failure to do
so, will VOID your warranty.
1200 PSI Hard Surface Extractor (7)