Control Panel Features; Adjusting The Temperatures And Display; Temperature Display - LG LSMX211ST Owner's Manual

Control Panel Features (continued)
Energy Saving Button
D
Press and hold the ENERGY SAVING button for
more than 3 seconds to activate or deactivate the
Energy Saving mode.
NOTE: If moisture forms in the area between the
two refrigerator doors, disable the "Energy Saving"
mode.
Alarm Button
E
Press the ALARM button to control the door-open
alarm.
Lock Button
F
Press and hold the LOCK button at least 3 seconds
to lock or unlock all the other function buttons on the
control panel, Including operation of the dispenser
and converta control panel.
CAUTION
Display Mode Setting And Its Cancel-
lation
• With the refrigerator door open,
keep pressing the REFRIGERATOR
button and ICE PLUS button more
than 5 seconds, then it goes to the
display mode.
• Perform the same way again to
cancel the display mode.
• All freezing units do not work at
the display mode.
Adjusting The Temperatures And
Display
Adjust Refrigerator Temperature
To adjust the temperature in the refrigerator compartment,
press the REFRIGERATOR button to cycle through the range
of available settings.
Adjust Freezer Temperature
To adjust the temperature in the freezer compartment, press
the FREEZER button to cycle through the range of available
settings.
NOTE: The actual inner temperature varies
depending on the food status, since the indicated
temperature setting is the target temperature
and not the actual temperature within the
refrigerator.
Initially set the REFRIGERATOR CONTROL at
37 degrees F and the FREEZER CONTROL at
0 degrees F. Leave them at these setting for
24 hours (one day) to stabilize. Then adjust the
compartment temperature as illustrated above.

Temperature Display

To change the temperature display from Fahrenheit to
Celsius:
Simultaneously press and hold the FREEZER and
REFRIGERATOR buttons for more than 5 seconds.
Do the same to convert back to Fahrenheit.
HOW TO USE 25