Troubleshooting - Teac PVR-80S Owner's Manual

Problem
You have forgotten your PIN
code.
The recording failed.
No display LED on the front
panel / No power supply
No picture on the screen.
No Sound
Remote Control does not
control the receiver.
Poor picture quality.

TROUBLESHOOTING

TROUBLESHOOTING
Possible cause
The HDD is full.
Power cord not plugged in
correctly.
Receiver in Standby mode
AV Output not tightly
connected to the TV's video
output
Incorrect input channel
selected on the TV.
Audio cord connected
incorrectly.
Volume level is 0.
Mute active.
Incorrect usage
Batteries dead or inserted
incorrectly.
Signal strength too low.
53
Solution to the problem
Contact your authorized
service company or the
customer service of your
network operator.
Remove files from the HDD.
Plug in the power cord
correctly.
Set the receiver to [ON]
Connect the connector
correctly.
Turn it to the right channel.
Check connection and correct.
Increase volume on the TV
set.
Press MUTE.
Point remote control towards
the receiver.
Replace batteries or insert
them correctly.
Check the signal strength in
the [Installation] menu, check
the cable signal from the
antenna.