Getting Started - Teac PVR-80S Owner's Manual

Since the receiver is supplied with factory default settings; you need to install the receiver.
The installation will start up with the service tuning menu.
Follow the instruction below to install the receiver properly.
Press the MENU key every time you go to the next setup menu.

GETTING STARTED

GETTING STARTED
Local Time Setup
If GMT is provided by the broadcaster, you may get
the time using the GMT provided by broadcaster (or)
you may get your own time. (Please be aware that the
GMT information provided by the broadcaster may
not be correct sometimes.)
- If GMT is provided, select "Yes" for GMT usage.
Then, select the location where you are (time zone)
and summer time On/Off. You can adjust the time
from +59 to -59 minutes by using the Time offset.
-If GMT is not provided or you want to set the time by
yourself, select "No" for GMT usage.
In this case, you can set your own time with the
calendar.
Press the OK key on Date, and the calendar is
displayed.
Use the ◀,▶ keys or the numerical keys to set the
time.
14