1. Manuals
  2. Brands
  3. Viking Manuals
  4. Lighting Equipment
  5. VK PB7 PIXELBLADE 7
  6. User manual

Viking VK PB7 PIXELBLADE 7 User Manual

Moving head
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
VK PB7 PIXELBLADE 7
MOVING HEAD
USER MANUAL
Rev 2.01

Advertisement

Table of Contents
loading

Related Manuals for Viking VK PB7 PIXELBLADE 7

Summary of Contents for Viking VK PB7 PIXELBLADE 7

  • Page 1 VK PB7 PIXELBLADE 7 MOVING HEAD USER MANUAL Rev 2.01...

  • Page 2: Safety Instructions

    FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOU INITALLY START This device has left our premises in absolutely perfect condition. In order to maintain this condition and to en- sure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written in this manual.
  • Page 3 If the fixture has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising condensation water might damage your device. Leave the device switched off until it has reached room temperature. Do not shake the fixture. Avoid brute force when installing or operating the fixture. This fixture was designed for indoor use only;...

  • Page 4: Installation

    2.1 Connection to the mains For protection from electric shock, the fixture must be earthed! The VK PB7 Pixelblade 7 is equipped with auto-switching power supply that automatically adjusts to any 50-60Hz AC power source from 100-240 Volts. This fixture must be earthed. To use the fixture, a plug must be fixed.

  • Page 5: Rigging The Fixture

    2.2 Rigging the fixture A structure intended for installation of the fixture (s) must safely hold weight of the fixture(s) placed on it. The structure has to be certificated to the purpose. The fixture (fixtures) must be installed in accordance with national and local electrical and construction codes and regulation.

  • Page 6: Dmx 512 Connection

    DMX-512 connection The fixture is equipped with both 3-pin and 5-pin XLR sockets for DMX input and output. The sockets are wired in parallel. Only use a shielded twisted-pair cable designed for RS-485 and 3-pin or 5-pin XLR-plugs and connectors in order to connect the controller with the fixture or one fixture with another. DMX - output DMX-input XLR mounting-sockets (rear view):...
  • Page 7 LCD Menu To operate the LCD Menu please use the 4 navigation buttons below, paying importance to selecting ENTER after altering any value to store the new value. MENU (F) To select the various options for settings DOWN To go backwards in the setting /function or value To go forwards in the setting /function or value ENTER (Hand) To confirm the selected function or store a value...

  • Page 8: Dmx Protocol

    3. DMX Protocol Extended Basic Standard Channel Function Mode Value Mode Mode 0－255 Pan 8 Bit Movement 0－255 Pan Fine 16 Bit Movement 0－255 Tilt 8 Bit Movement 0－255 Tilt Fine 16 Bit Movement 0－255 Pan/Tilt Speed Fast to Slow Pan Continuous Rotation: 0－79 No Function...
  • Page 9 0－255 Led 4: Green 0－255 Led 4: Blue 0－255 Led 4: White 0－255 Led 5: Red 0－255 Led 5: Green 0－255 Led 5: Blue 0－255 Led 5: White 0－255 Led 6: Red 0－255 Led 6: Green 0－255 Led 6: Blue 0－255 Led 6: White 0－255...
  • Page 10 Technical Specifications The new VKPB7 Pixelblade is a versatile moving bar effect light featuring 7 individual 15W RGBW 4-in-1 LEDs with new advanced 67mm PMMA 4.5° optic lenses, producing laser-like colour-changing beams from each lens (combined 31°) allowing creation of light curtain, eye candy, and in air effects. 7x15w Osram 4 in 1 RGBW Flicker Free Lens: 7x67mm PMMA 4.5°...

  • Page 11: Photometric Diagrams

    4. Photometric diagrams All diagrams are for full power of the lamp (Standard Mode)

Table of Contents