Table of Contents
Advertisement
HOW TO CHANGE COLOR PANELS
If you are redecorating, you can change your dishwasher's front panels to
match or blend with your new colors by flipping them over. Each side of
each panel is a different color. You may also paint a panel with a color of
your own choice.
How to Change the Door Panel:
1. Take out trim screws on either side of the
dishwasher door. Remove the side trim.
2. Slide the door panel out.
(Careful—edges may be sharp.)
3. Turn the door panel around and put the color you
want in front.
4. Replace the door panel, side trim and screws.
How to Change the Lower Panel:
Bottom Panel Attachment Screws
Wood Panel fiim Kit
Wood panel trim kits, contain trim and
instructions for adding a decorative wood door
panel and lower access panel no thicker than 1/4"
to match kitchen cabinets.
Specify the trim color of your choice from the
following options:
12
1. Remove the bottom panel attachment screws.
2. On models without top mounting screws, remove
the entire access assembly by lifting it up and over
the retaining tabs.
3. On models with top mounting screws, remove
the screws.
4. Take out the top trim screws and remove the
top trim.
5. Slide the color panel(s) up and out and put the
color you want in front.
6. Replace the top trim and screws
7. Replace the entire access assembly by reversing
the steps.
The kit is available for $5.00 (shipping and handling).
Make check payable to the General Electric Co.
Order a Trim Kit from:
GE Appliances
c/o Dri-View Manufacturing
4706 Allmond Ave.
Louisville, KY 40209
NOTE: Do not operate
dishwasher while changing
panels or when lower access
panel is removed.
Advertisement
Table of Contents
