OVERALL DIMENSIONS - MINIMUM SPACE REQUIRED AND WEIGHTS
Overall dimensions
Mod. 150.4 ÷ 260.4
1
100
Mod. 285.4 - 315.4
1
100
Description of the components
1 - Access panel to electric panel
2 - Coil protection grilles (accessory)
3 - ł 82 mm lifting holes
4 - Input plate for power supply cables, unit and electrical accessories type (F)
(120x250 mm - useful hole on cabinet 73x200)
Minimum space required for operation
26
100
1946*
2050
100
2230*
2350
Electric panel side
To correctly install the unit, comply with the measurements for the free area
that must be left around the machine, as shown in the figure. This will ensu-
re good air circulation, allow the unit to operate correctly and facilitate futu-
re maintenance work.
The distances must be doubled if the unit is to be installed in a pit.
NOTE: Allow for an uncluttered area of not less than 2.5 meters
above the unit.
2
450
*
Center distance of vibration damper holes
2
3
202
*
Center distance of vibration damper holes
2949 Max.
1800*
697
2947
=ł18mm
2290*
503
2995
=ł18mm
4
4