PEUGEOT RCZ Handbook page 124

"ISOFIX" MOUNTINGS
Your vehicle has been approved to the latest ISOFIX regulations .
The seats represented below are fi tted with regulation ISOFIX
mountings:
These are three rings for each seat:
- two rings A , located between the vehicle seat back and cushion,
indicated by a label,
- a ring B referred to as the TOP TETHER , located under a cover
behind the top of the backrest for fi xing the upper strap.
This ISOFIX mounting system provides fast, reliable and safe fi tting of
the child seat in your vehicle.
The ISOFIX child seats are fi tted with two locks which are secured
easily on the two rings A .
Some also have an upper strap which is attached to ring B .
To secure the child seat to the TOP TETHER :
- open the cover at the top of the backrest,
- fi x the hook on the upper strap to the ring B ,
- tighten the upper strap.
The incorrect installation of a child seat in a vehicle compromises
the child's protection in the event of an accident.
Observe strictly the fi tting instructions in the installation guide
provided with the child seat.
For information regarding the possibilities for installing ISOFIX
child seats in your vehicle, refer to the table.