Selecting A Drive Mode - Panasonic DMC-FZ300 Operating Instructions Manual

Button
operation
—
—
[DISP.]
5
Press the shutter button halfway
• The assist screen will close. The recording screen will be displayed.
• You can also exit MF Assist by pressing [MENU/SET].

Selecting a Drive Mode

Recording mode:
You can switch the operation to be performed when you press the shutter button.
1
Press [
2
Press
press [MENU/SET]
• The icons in the table are just examples.
[Single]
[Burst]
[4K PHOTO] (→30)
[Auto Bracket]
[Self Timer]

Cannot be set when using Intelligent Auto Mode.
• To cancel drive mode, select [
Touch
operation
Drag
Pinch in /
Pinch out
—
[Reset]
] button ( )
to select the drive mode and
When the shutter button is pressed, only one picture is recorded.
The pictures are recorded in succession while the shutter button
is pressed.
When the shutter button is pressed, a 4K photo is recorded.
Each time the shutter button is pressed, the pictures are

recorded with different exposure settings based on the Exposure
Compensation range.
When the shutter button is pressed, recording takes place after
the set time has elapsed.
Description
Moves the enlarged area.
Enlarges/reduces the AF area in small steps.
Enlarges/reduces the AF area in large steps.
Switches the enlarged display. (windowed/full screen)
Resets the area to be enlarged back to the centre.
] ([Single]) or [ ].
Recording
29
SQT0973 (ENG)