[Lvf] Button; (Switching Between The Monitor And Viewfinder); Touch Screen (Touch Operations) - Panasonic DMC-FZ300 Operating Instructions Manual

[LVF] button

(Switching between the monitor and viewfinder)

1
Press [LVF] button
• The display is switched as shown below.
Automatic switching
between viewfinder
and monitor

If [Eye Sensor AF] in the [Custom] menu is set to [ON], the
camera automatically adjusts the focus as the eye sensor is
activated.
■
Automatic switching between viewfinder and monitor
For automatic switching between the viewfinder and monitor, the eye sensor
automatically switches the display to viewfinder when your eye or an object moves
close to the viewfinder.
■
About diopter adjustment
Rotate the diopter adjustment dial to adjust until you are able to clearly see the
characters displayed in the viewfinder.

Touch screen (Touch operations)

Touch screen of this unit is capacitive. Touch the panel directly with your bare finger.
Touch
To touch and release the touch screen. Be sure to touch the
centre of the desired icon.
Drag
To touch and slide your finger across the touch screen.
This can also be used to forward or rewind a picture during
playback, etc.
Pinch (spread/pinch)
On the touch screen, spread (pinch out) your 2 fingers to
zoom in, and pinch (pinch in) your 2 fingers to zoom out.
Viewfinder

display

Monitor
display
[LVF] button
Diopter adjustment dial
SQT0973 (ENG)
Basics
Eye Sensor
21