Location Of Controls - AEG HSM/R 5638 Instruction Manual

• Cleaning and user maintenance shall not be made
by children without supervision.
• Do not operate the hair and beard clippers with wet
hands.
• Only cut dry hair with this unit.
• Only use this unit to cut head hair and beard.
• Do not press the clipper head too firmly onto the
skin. Danger of injury.
• Charge the unit in a cool and dry location.

Location of Controls

1 On/Off switch
2 Indicator light
3 Housing
4 Charging station/stand
5 Power adapter plug
6 Clipper head
7 Cutting length combs (3, 6 and 9 mm)
Not shown.: Cleaning brush
Charging the Unit
• Turn the unit off. "OFF" can be seen on the switch.
• Connect the power adaptor connector with one of the following jacks.
• The socket directly at the bottom end of the unit.
• Alternatively place the unit in the charging station. The socket is at the rear.
• Plug the power adaptor into wall outlet.
• The indicator light remains red during the charging process.
English
43