Connecting The Drawer - Quanmax RPD-1171 User Manual

3.2 Connecting the Drawer

To connect an RPD-1171 and RPD-1178 monitor/keyboard drawer to a computer,
perform the following
steps:
1. Turn off your computer. You should always turn off your computer
before connecting or disconnecting a device.
2. Connect the KVM cable to the "System 1" connector on the
monitor/keyboard drawer.
3. Connect the video (VGA) connector of the KVM cable to the video card
connector on the rear panel of your computer.
4. Identify and connect the PS/2 mouse and PS/2 keyboard connector to
the correct PS/2 ports on the rear panel of your computer.
5. Connect the AC power cord to the power inlet on the drawer and then to
a power outlet.
6. If the RPD-1171 is used, step 2 & 3 should be skipped. Users need only
connect the RPD-1171 VGA in port to computer system's VGA out port.
NOTE: Please refer to chapter 4 for more information about the RPD-1178.
The rear view of the RPD-1171/RPD-1178
26
RPD-1171/1178 User Manual