Controlling The Volume; Power Saving Function - Sony SDM-HX93 Manual

Technical Features

Controlling the volume

Using the monitor's speakers or headphones, you can listen to
sound from your computer or other audio equipment connected to
the monitor's audio input jacks.
You can control the volume by using a separate "Volume" menu
from the main menu.
1 Press the m/M buttons when no menu appears on
the screen.
,
2 Press the m/M buttons to control the volume.
The menu automatically disappears after about 5 seconds.
Notes
• You cannot adjust the volume when the main menu is displayed on the
screen.
• When your monitor is in power saving mode, no sound comes from the
speakers or the headphones.
VO L U M E
3 0

Power saving function

This monitor meets the power-saving guidelines set by VESA,
E S
NERGY TAR, and NUTEK. If the monitor is connected to a
computer or video graphics board that is DPMS (Display Power
Management Signaling) compliant, the monitor will
automatically reduce power consumption as shown below.
SDM-HX73
Power mode Power consumption
normal 50 W (max.)
operation
active off* 1 W (max.)
(deep sleep)**
1 (power) off
1 W (max.)
SDM-HX93
Power mode Power consumption
normal 60 W (max.)
operation
active off* 1 W (max.)
(deep sleep)**
1 (power) off
1 W (max.)
* When your computer enters the "active off" mode, the input signal is
cut and "NO INPUT SIGNAL" appears on the screen. After 5
seconds, the monitor enters the power saving mode.
** "Deep sleep" is a power saving mode defined by the Environmental
Protection Agency.
(power)
1
indicator
green
amber
off
(power)
1
indicator
green
amber
GB
off
(continued)
19