Summary of Contents for Atlantis Land A02-IPCAM2-W54
Page 1
NetCamera Pro IP Security Wireless Motorized Camera A02-IPCAM2-W54 MULTILANGUAGE Quick Start Guide A02-IPCAM2-W54_GX01 Where solutions begin Company certified ISO 9001:2000...
Page 3
Italiano fare riferimento al sito www.atlantis-land.com. ENGLISH This product is covered by Atlantis Land 3 years Fast-Swap warranty. For more detailed informations please refer to the web site www.atlantis-land.com. For more detailed instructions on configuring and using this device, please refer to the online manual.
Page 4
WARRANTY. The Atlantis Land logo is a registered trademark of Atlantis Land SpA. All other names mentioned mat be trademarks or registered trademarks of their respective owners. Subject to change without notice.
Page 7
Atlantis Land spa che non si assume responsabilità per qualsiasi errore o inesattezza che possa apparire in questo manuale. Nessuna parte di questa pubblicazione può essere...
1.1 Contenuto della confezione Atlantis Land NetCamera Pro, CDRom contenente il manuale ed il software IPView Pro, Guida di Quick Start, cavo CAT-5 LAN, Antenna esterna, Alimentatore (5V, 2.5A) ed una clip metallica per il fissaggio a muro.
1.3 Le porte posteriori 1 DC Power Connector Porte Network Cable Antenna Connector Reset 2 Reset Button Utilizzo Connettere il cavo RJ-45 a questa porta l’allacciamento alla Lan Avvitare l’antenna connettore Dopo acceso, premere per effettuare il reset o il restore. Le operazioni ITALIANO (Antenna) 3 Network Cable...
POWER (jack) 1.4 Cablaggio Collegare il cavo ethernet al connettore per il cavo di rete che si trova nel pannello posteriore della webcamera e poi collegarlo alla rete. Avvitare delicatamente l’Antenna nell’apposito connettore. sono le seguenti: secondi: per resettare il dispositivo comincerà...
Collegare l’alimentazione esterna alla presa CC che si trova sul pannello posteriore della webcamera, e poi collegare alla rete elettrica e verificare che ci sia tensione elettrica sulla rete controllare che il LED di alimentazione sulla webcamera sia acceso. 1.5 Settaggi di Default Prima di iniziare la configurazione dell’Atlantis NetCamera Pro è...
1.6 Configurazione IP Security Cam Accedere col browser web al seguente indirizzo IP che di default è: http://192.168.1.2, e premere il tasto invio. Introdurre qui l’indirizzo IP 192.168.1.2 Apparirà a questo punto il Menù Principale diviso in 3 differenti aree: Menu Bar, Video Show Area e Control Buttons.
Page 13
Video Show Area Cliccando sulla sezione Menu Bar, nello spazio Control Buttons appariranno configurazione della sezione scelta, oppure si apriranno tutta una serie di sottosezioni tra cui scegliere prima di avere accesso alle configurazione vere e proprie. Consultare il manuale completo presente nel CDRom a corredo per ulteriori approfondimenti.
Per qualunque altro problema o dubbio è possibile contattare l’help desk telefonico (02/93907634) gratuito di Atlantis Land che fornirà assistenza da lunedì al giovedì dalle 9:00 alle 13:00 e dalle 14:00 alle 18:00. Il venerdì dalle 9 :00 alle 13 :00.
All copyright reserved. The Atlantis Land logo is a registered trademark of Atlantis Land SpA. All other names mentioned mat be trademarks or registered trademarks of their respective owners. Subject to change without notice.
For more detailed instructions on configuring and using the NetCamera Pro, please refer to the online manual. 1.1 Package contents Atlantis Land NetCamera Pro, CDRom with manual and IPView Pro, Quick Start Guide, Antenna, Power Adapter AC-DC (5V, 2.5A) and Metal Clip (wall mounting).
ENGLISH from/to the network. 1.3 The Rear Ports Port Meaning The Wireless Internet Camera’s Network Cable rear panel features an RJ-45 connector for connections to 10Base-T Ethernet cabling or 100Base-TX Fast Ethernet cabling...
Antenna Connector Reset Button POWER (jack) 1.4 Cabling Connect an Ethernet cable to the network cable connector located on the camera’s rear panel, and then attach it to the network. Then screw the external Antenna that came with the Wireless Internet Camera into the antenna connector. There is the SMA type antenna connector located on the rear panel of the Wireless Internet...
Page 19
ENGLISH Attach the external power supply to the DC power input connector located on camera’s rear panel, and then connect it to your local power supply. You can confirm power source is supplied from the Power LED on the camera is illuminated.
1.5 Default Settings Before you configurethe NetCamera Pro, you need to know the following default settings: • Password: admin • Userneme: admin • IP address : 192.168.1.2 • Wireless : disabled 1.6 Browser configuration Open the web browser, enter the local port IP address of this NetCamera Pro, which default at http://192.168.1.2, and click “Go”...
Page 21
Enter the default IP Address in the Address bar After login, the Home window of the Configuration Utility will appear as below, which includes three areas: Menu Bar, Video Show Area, and Control Buttons. Enter the default username and password computer’s correspond with...
CDRom. If you continue to have problems you should contact the dealer where you bought this device. If you have any other questions you can contact the Atlantis Land company directly at the following address: Atlantis Land SpA Viale De Gasperi, 122 20017 Mazzo di Rho(MI)
FRANCAIS Copyright Copyright . 2002 est la propriété de cette société. Tous droits réservés. Sont interdites, reproduction, transmission, la transcription, la mémorisation dans un système de sauvegarde où la traduction dans une autre langue ou en langage informatique quels qu’ils soient, de la présente publication, sous quelque forme que ce soit ou quel qu’en soit le moyen, électronique, mécanique, magnétique, optique, chimique, manuel ou de tout autre...
électronique (PDF) disponible sur le CDRom fourni. 1.1 Contenu de la boîte Avant l’installation, assurez-vous de disposer des éléments suivants : Atlantis Land NetCamera Pro, Application IPView Pro, Manuel, Guide d’installation rapide, Câble réseau RJ45 (Cat 5), Antenne, Adaptateur secteur et pince métallique.
1.3 Face arrière Port Cable réseau Antenne Bouton Reset (remise à zéro) Usage Reliez directement câble Ethernet standard croisé aux PC ou à un port uplink (Hub/Switch). Vissez l'antenne connecteur Dispositif allumé, pressez pour effectuer reset restauration usine. 1 secondes: reset (remise à zéro) FRANCAIS avec...
Prise d’alimentation 1.4 Câblage La NetCamera Pro, qui est équipée de pas de vis sur les faces supérieure et inferieure, est livrée avec une pince métallique permettant de la fixer dans toutes les positions (table, mur, plafond). Fixez à l’arrière de la Wireless Internet Camera, l’antenne fournie.
Vérifiez que la LED Power est allumée sur la face avant de votreNetCamera Pro. 1.5 Configuration initiale Avant de commencer la configuration de l'IP Wireless Security Cam, configuration par défaut : Pour fixer la pince métallique, enlevez d'abord les deux patins en caoutchouc qui se trouvent sous la base de la caméra.
• User: admin • Password : admin • Adresse IP: 192.168.1.2 • Wireless : disable 1.6 Configuration avec le Browser Pour accéder à l’interface Web, lancez un navigateur Internet et tapez dans la barre adresse l’IP suivante : http://192.168.1.2 Tapez l’adresse IP de la NetCamera Vous entrerez dans le Menu Principal, dans la partie gauche on accédera à...
Page 31
Pour modalité nécessaire d'installer le Plug-in. Menu Bar Video Area Pour modalité nécessaire d'installer le Plug-in. FRANCAIS ActiveX, Control Buttons ActiveX,...
« help desk » téléphonique gratuite d’Atlantis Land qui vous fournira assistance du: lundi au vendredi de 9.00 à 13.00 et 14.00 à 18.00 Vous pouvez aussi nous contacter par email : tech-fr@atlantis-land.com Atlantis Land France 57, Rue d’Amsterdam 75008 Paris WWW: http://www.atlantis-land.fr...
Page 35
Atlantis Land S.p.A. Viale De Gasperi, 122 Mazzo di Rho – MI – Italy info@atlantis-land.com sales@atlantis-land.com www.atlantis-land.com Where solutions begin Company certified ISO 9001:2000...