Parameters And Specifications; Electronical Parameters - LENCO MES-4031 User Manual

Setup Menu Setting
Preference Page
PAL - Select this if the connected TV is PAL system.It
video signal of a NTSC disc and output in PAL format.
NTSC -Select this if the connected TV is NTSC system.It will
the video signal of a PAL disc and output in NTSC format.
Auto :Chang the video signal output automatic according to the
playing disk format.
Audio :Selects a language for audio (if available).
Subtitle :Selects a language for subtitle (if available).
Disc Menu: Selects a language for disc menu (if available).
Slaver TFT Menu Setting
Picture Page
Brightness
Adjust screen Bright Setting.
Contrast
Adjust screen Contrast Setting.
Color
Adjust screen Color Setting.
LANG
Adjust Menu OSD Language
ZOOM
Adjust screen ZOOM 16:9 or 4:3
change
will the
change
PICTURE
BRIGHT 50
CONTRAST 50
COLOR
50
LANG ENGLISH
Z00M 16:9

Parameters and specifications

Electronical parameters

Item
Power requirements : AC 100-240 V , 50/60 Hz
Power consumption : <15W
Operating humidity
: 5 % to 90 %
VIDEO OUT
:1.0 Vrms (1 KHz, 0 dB)
AUDIO OUT
:Speaker:1WX2,
Audio
System
:Semiconductor laser, wavelength 650 nm
Laser
Signal system : NTSC / PAL
Frequency
: 20Hz to 20 kHz(1dB)
response
:More than 80 dB (ANALOG OUT connectors only)
Signal-to-noise ratio
Dynamic range :More than 80 dB (DVD/CD)
Note: Design and specifications are subject to change prior notice.
9
Standard requirement
Headphones output, Coaxial output