Samsung ASA07C5(6)ME Service Manual page 9

Operating Instructions and Installation
3-1-2 Name & Function of Key in remote controller
1. AUTO MODE : In this mode, operation
mode(COOL) is selected automatically by
the room temperature of initial operation.
Operation Type
Tr≥ 25°C+∆T
Cool Operation
Tr< 24°C+∆T
∆T= -1°C, -2°C, 0°C+1°C+2°C
∆T is controlled by setting temperature
up/down key of remote controller
*FAN SPEED : AUTO
2. COOL MODE : The unit operates according
to the difference between the setting and
room temperature. (18°C~30°C)
3. DRY MODE : Has 3 states, each determined
by room temperature.
The unit operates in DRY mode.
*Compressor ON/OFF Time is controlled
compulsorily(can not set up the fan speed,
always breeze).
*Protective function : Low temperature
release. (Prevention against freeze)
4. TURBO MODE : This mode is available in
AUTO, COOL, DRY, FAN MODE.
When this button is pressed at first, the air
conditioner is operated "powerful" state for
30 minutes regardless of the set tempera-
ture, room temperature.
When this button is pressed again, or when
the operating time is 30 minutes, turbo
operation mode is canceled and returned to
the previous mode.
*But, if you press the TURBO button in DRY
or FAN mode that is changed with AUTO
mode automatically.
3-2
Room Temp
Compressor ON
Compressor OFF
5. SLEEP MODE : Sleep mode is available
only in COOL or mode.
The operation will stop after 6 hours.
*In COOL mode : The setting temperature
is automatically raised by 1°C each 1hour
When the temperature has been raised by
total of 2°C, that temperature is main-
tained.
6. FAN SPEED : Manual (3 step), Auto (4 step)
Fan speed automatically varies depending
on both the difference between setting and
the room temperature.
7. COMPULSORY OPERATION :
For operating the air conditioner without
the remote controller.
*AUTO : The operating is the same func-
tion that AUTO MODE in the remote con-
troller. And each time you press the button
the 5WAY function is changed as follow.
STD NATURE
SILENCE POWER OFF
STD(standard)(
NATURE( ) : The unit is operated
POWER( ) : The unit is operated in
SAVING( ) : The unit is operated in
SILENCE( ) : The unit is operated
Each mode has Auto, Cool and SLEEP oper-
ation designed in advance.
POWER SAVING
) : General operation
Mode
according to health
pattern control
powerful state
power saving state
quitely
Samsung Electronics