Samsung ASA07C5(6)ME Service Manual page 25

Disassembly and Reassembly
No Parts
3
Heat Exchanger
4
Compressor
4-6
Procedure
2) Remove the nut flange (Turn to the right to
remove, as it is a left hand screw)
3) Separate the fan.
4) Loosen four fixing screws to separate the
motor.
1) Do "1", 2 above.
2) Loosen two fixing screws of left and right
side.
3) Disassemble the inlet and outlet pipe by
welding.
4) Separate the heat exchanger.
1) Do "1", above.
2) Loosen the nut on the terminal cover and
open the terminal cover.
3) Disassemble the inlet and outlet pipe of com-
pressor by welding.
4) Disassemble the inlet and outlet pipe of con-
denser by welding
5) Loosen the three bolts of the lower part.
6) Separate the compressor.
Remark
Samsung Electronics