Preset White Balance - Nikon Coolpix 5900 User Manual

Preset White Balance

Preset white balance is used when shooting under
mixed lighting or to compensate for light sources
with a strong color cast (for example, to make pic-
tures taken under a lamp with a red shade look as
though they had been taken under white light).
When White bal. preset is selected from the
White balance menu, the camera will zoom in and
the menu shown above at right will be displayed in
the monitor.
Option
Cancel
Measure
Preset White Balance
• The camera can not measure a value for preset white balance when the flash fires. Regardless of
the Flash mode selected, the flash will not fire when selecting Measure.
• When Auto bracketing is set to
White Balance Indicator
Unless the setting is
an icon in the monitor.
Recalls the most recent value for preset white bal-
ance from the memory and sets white balance to
this value.
To measure a new value for white balance, place a
neutral gray object, such as a piece of cardboard,
under the lighting that will be used in the final pic-
ture. Frame this object so that it fills the square in
the center of the menu shown above. Highlight
Measure and press
white balance (shutter will be released and camera
will return to original zoom position, but no picture
will be recorded).
WB bracketing, preset white balance can not be used.
Auto, White balance is shown by
WHITE BAL. PRESET WHITE BAL. PRESET
Exit Exit Exit Exit
White balance measur-
ing window
Description
to measure a new value for
Cancel
Measure
Confirm Confir Confirm Confir
[ [ 8] 8]
87