Licenses; Open Source Software Notice - LG PM47 Series Owner's Manual

A-4
SETTING UP THE TV
To detach the stand,
1
42/50PM47**, 50/60PM67**
50/60PM68**, 50/60PM97**
2
Protection Cover
3
NOTE
y When installing the wall mounting bracket,
use the Protection Cover.
y This will protect the opening from
accumulating dust and dirt.
y Remove the stand before installing the TV
on a wall mount by performing the stand
attachment in reverse.
CAUTION
y When attaching the stand to the TV
set, place the screen facing down on a
cushioned table or flat surface to protect the
screen from scratches.
y Make sure that the screws are fastened
M4 x 30
completely. (If they are not fastened
4EA
securely enough, the TV may tilt forward
after being installed.)
Do not fasten the screws with too much
force; otherwise they may be worn out and
get loosened.
Tidying cables
M4 x 30
4EA
1 Install the Power Cord Holder and Power Cord.
It will help prevent the power cable from being
removed by accident.
2 Gather and bind the cables with the Cable
Holder. Install the LAN Cable as shown to
reduce the electromagnetic wave.
M4 x 30
2EA
CAUTION
y Do not move the TV by holding the cable
holder and power cord holder, as the cable
holders may break, and injuries and damage
to the TV may occur.
Power Cord Holder
Cable Holder