Operation
To move the cursor, turn the control knob to
the left or the right. The marked position is
brighter and/or has a turned up tab.
Selecting menu
To advance in the menu system select a main menu by
marking it and then pressing the OK button. A new
window then opens with sub menus.
Select one of the sub menus by marking it and then
pressing the OK button.
Selecting options
In an options menu the current selected option is
indicated by a green tick.
To select another option:
1. Mark the applicable option. One of the options
is pre-selected (white).
2. Press the OK button to confirm the selected op-
tion. The selected option has a green tick.
36
Chapter 7 |
Control - Introduction
Setting a value
To set a value:
1. Mark the value you want to set using the con-
trol knob.
2. Press the OK button. The background of the
value becomes green, which means that you
have accessed the setting mode.
3. Turn the control knob to the right to increase
the value and to the left to reduce the value.
4. Press the OK button to confirm the value you
have set. To change and return to the original
value, press the Back button.
NIBE™ F750