Advertisement
Reference
Usage
Usage
Turn on
To turn on the receiver, first, make sure that the battery is loaded securely then
push the power switch to "ON" position. The green LED (LED 1) indicator will
be flashing for searching GPS satellites. The blue LED (LED 3) indicator will
start flashing for searching Bluetooth device.
Turn off
To turn off the receiver, push the power switch to "OFF" position. All of the
LED indicators will turn off.
Low Power & Charging
The second LED (LED 2) indicator will turn RED when battery power becomes
low. Connect the receiver to a power source to recharge the battery. When the
battery is being charging, LED2 will turn YELLOW. When fully charged, the
YELLOW indicator will switch OFF. Please charge the battery fully before first
use.
3
Advertisement
