LG DLE4801W Owner's Manual page 21

Connecting electric dryers (cont.)
USA only
WARNING
wire should be connected to same color screw. Wire color
indicated on manual is connected to the same color screw
in block. Failure to follow these instructions may result in a
short or overload.
prohibit grounding through the neutral conductor.
Four-Wire Connection for Electric Dryers:
Power Cord
the dryer. Install a UL-listed strain relief into the power cord
through-hole; then thread a UL-listed,
conductor power cord through the
strain relief.
UL-Listed
4-Wire Power
Cord
Terminal
UL-Listed
Strain Relief
INSTALLATION INSTRUCTIONS
minimum copper conductor and closed loop or forked
terminals with upturned ends.
screw to the center screw of the terminal block. Attach the two
hot leads of the power cord to the outer terminal block screws.
Attach the white neutral wire to the center terminal block
screw. Attach the power cord ground wire to the green ground
screw. TIGHTEN ALL SCREWS SECURELY. Reinstall the terminal
block access cover.
Neutral
Hot
(White)
Ground Screw
Power Cord
Ground Wire
21
Hot
(Red)